Bearings Manufacturer - HYP Bearing!


  • [Tech Support] Characteristics of grease lubrication Date:2014-01-14 11:43:50 Click:143 Praise:0

    LUBRICATION Pyc bearings, single or double shielded (Z, ZZ) and single or double sealed (RS, 2RS). Before the formal shipment, we fill into the qualified oil or grease strictly. If you have any special requests about the lubrication, please...

  • [Tech Support] structure of bearings Date:2013-12-27 16:29:02 Click:55 Praise:0

    Single-row deep groove ball bearings are the most common type of rolling bearing, having a wide range of suitable applications. The raceway grooves on both inner and outer rings have circular arcs of slightly larger radius than that of the b...

  • [Tech Support] bearings material Date:2013-12-27 16:27:50 Click:95 Praise:0

    RINGS BALLS vacuum degassed, high carbon chromium bearing steel GCr15 is the standard material for precision bearing rings and balls. The material has uniform specification as AISL 52100(America)DIN100 Cr6(German),JISSUJ2(Japan) Steel No. Ch...

  • [Tech Support] accuracy of bearing Date:2013-12-27 16:26:35 Click:55 Praise:0

    There are stipulations to the roller bearing major size allowable tolerance, admittance value, rotating precision in the National Standard of GB3.7.1. the following is a comparison table between these admissions and ISO, JIS Standards: Stand...

  • [Tech Support] vibration and noise Date:2013-12-27 16:21:10 Click:91 Praise:0

    VIBRATION AND NOISE The vibration and noise of bearings are classified as four classed as Z1,Z2,Z3 and Z4.It is measured by the instrument of S0910-1,For special requirement,it is measured by BVT-1 and classified as V1, V2, V3 and V4.The da...

  • [Tech Support] internal clearance Date:2013-12-27 16:19:32 Click:137 Praise:0

    Clearance is gap amid bearing inner ring, outer ring, ball package. Bearing has radial clearance and axial clearance. Deep-groove ball bearing radial clearance Nominal bearing inner diameter d(mm) Clearance C2 CN C3 C4 C5 Exceed Below M...

  • [Tech Support] Points of attention Date:2013-12-27 16:18:17 Click:50 Praise:0

    Points of attention for using Roller bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing is, it can not be obtained by improper use. The followings are the points for attention of use...

  • [Tech Support] installation Date:2013-12-27 16:15:26 Click:200 Praise:0

    The bearing installation has close relationships with the accuracy, life and performance. Therefore the design and assembly departments should fully research into the bearing installation. It is better to implement installation according to...

  • [Tech Support] Inspection ,Test Date:2013-12-25 10:46:26 Click:166 Praise:0

    In the whole course from purchasing of raw materials to every process of production, LBBrand besrings are all strictly and carefully inspected to guarantee quality.Besides the basic and normally used testing instruments,the company also adop...

  • 共 1 页/9 条记录
Online orders
Online orders
names: *
Number:  *
Address: *
Telephone: *
mailbox: *